Bluetooth In (QIO-WP-BT)
Overview
The Bluetooth In component provides configuration and control of Bluetooth input signals on any QIO Audio Wall Plate products that support them. In general, the Bluetooth In component should look and behave in a way that is consistent with input components for other Q-SYS products.
The channel count of the Bluetooth In component depends on the Bluetooth Audio Mode that has been selected:
| Bluetooth Audio Mode | Bluetooth In channel count |
|---|---|
| Media Bridging | 2 |
| Call Bridging | 1 |
| Call & Media Bridging | 2 |
| AuraCast | N/A (Bluetooth In component is not available in this mode) |
Component Icon and Control Pin I/O
-
The component shall be similar to other input components throughout Q-SYS.
-
The component shall have either one or two input nodes, depending on whether it corresponds to a one- or two-channel module.
Component Dialog
The image below shows an example of a two-channel Bluetooth In component dialog. The dialogs should have an appropriate number of audio channels, depending on the Bluetooth Audio Mode property.
Properties
Properties for Bluetooth In are the same as Status (QIO-WP-BT) component. (The verbose property can only be selected in Status).
Refer to the Properties Panel help topic for general information.
Controls
All controls are applied to each channel.
Peak Input Level (dBFS)
Meters for each channel indicating the peak input level.
Invert
Toggle button to invert the digital output of the Mic/Line In component.
Mute
Mutes the output signal.
Gain (dB)
Controls the Gain of the digital output signal.
Control Pins
All control pins are applied to each channel.
| Pin Name | Value | String | Position | Pins Available |
|---|---|---|---|---|
| Gain | -100 to 20 | -100 dB to 20 dB | 0.000 to 1.00 | Input / Output |
| Invert |
0 1 |
normal invert |
0 1 |
Input / Output |
| Level (dBFS) | -100 to 20 | -100 dB to 20 dB |
0.000 to1.00 |
Output |
| Mute |
0 1 |
unmute mute |
0 1 |
Input / Output |
