VisionSuite Release Notes

This topic covers release information for the Q-SYS VisionSuite software.

Q-SYS VisionSuite v90.0.5 was released February 4, 2025 with the following updates.

Resolved Known Issues

  • VisionSuite: The issue with the zone states not persisting after a server reboot when set via the public websocket API has been resolved.
  • VisionSuite: The issue with tracking getting stuck has been resolved.
  • VisionSuite Plugin: The issue where the mediacast router does not switch between Seervision cameras when in ACPR mode and an SV zone is active has been resolved.
  • VisionSuite Plugin: The issue where reboot controls revert on redeploy if the room configuration is not saved before redeploying has been resolved.

Q-SYS VisionSuite v90.0.4 was released October 15, 2024 with the following updates.

Note: While it may appear that certain versions are missing, note that versions 90.0.2 and 90.0.3 were released exclusively for internal use.

Improvements

  • Release notes in VisionSuite package in Asset Manager now point to Q-SYS help
  • VisionSuite Plugin now has the ability to schedule rebooting all connected Seervision Servers (SVs), either daily, or on a specific day of the week. This can be used to mitigate issues with an SVs becoming sluggish or unresponsive after some time.

Tip: We recommend using v90.0.4 with firmware v2.0.1 and QDS 9.10.2 (or later) for all new installs. See VisionSuite Installation/Upgrade.

Resolved Known Issues

  • VisionSuite: Fixed multiple bugs which caused tracking to be interrupted or computer vision to fail.
  • VisionSuite: Fixed a bug which caused the computer vision health to incorrectly show error when RTSP stream is not selected on factory fresh boot.
  • VisionSuite: Fixed an issue with interference errors on fresh booth with no RTSP streams.
  • VisionSuite Plugin: Fixed an issue where pressing F1 in Q-SYS Designer did not load the Seervision or ACPR help file.
  • VisionSuite Plugin: Fixed a bug which allowed Manual Recall button to bypass the ACPR / SV Plugin's Video Auto Switch.
  • VisionSuite Plugin: Fixed a bug so Exclusion Zone and Tracking Zone dropdowns are initialized to "<None>" on initial plugin load.
  • VisionSuite Plugin: Fixed a bug which caused room configuration controls to not save their values/states between multiple room configurations.
  • VisionSuite Plugin: Fixed TCCM's in ACPR caused by mismatched controls.
  • VisionSuite Plugin: Fixed a bug that caused the privacy button not to be turned off when a USB video bridge left its privacy position in all cases.

Q-SYS VisionSuite v90.0.1 was released August 28, 2024 with the following updates.

Resolved Known Issues

VisionSuite: Fixed an issue that caused tracking to be stuck in 'enable' state, which prevented position containers from being recalled manually.

Q-SYS VisionSuite v90.0.0 was released August 19, 2024 with the following updates.

New Features

Allows you to update firmware on your AI accelerator without an internet connection.

Enables the Seervision control plugin to discover the Seervision server using Q-SYS Designer Software, replacing the manual IP address discovery process.

Enables a single press to rotate PTZ cameras to a privacy position, switch to a user configurable privacy graphic, and stop all camera automation.

New global microphone status for ACPR enables seamless remote status monitoring from Q-SYS Reflect.

Added support for the Yamaha RM-CG network ceiling microphone.

Automatic Camera Preset Recall (ACPR) plugin (v3.1.0.0) has been deprecated. To deploy the latest ACPR functionality, you should continue to leverage the new Q-SYS VisionSuite plugin, which is now inclusive of both ACPR and Seervision intelligent presenter tracking control plugins.

Improvements

  • New user consent dialogue for recording video
  • Improvements for ACPR RX/TX logging/debugging
  • Improvements for perception / computer vision logs
  • Seervision Control plugin's event log provides an easy way to trace events and actions.

Resolved Known Issues

  • Significant improvements to RTSP robustness
  • Owner ID no longer changes after provisioning
  • Resolved the issue with link local VisionSuite firmware upgrades
  • Resolved the issue with DNS service failures/instability
  • Updates to manage UI snack bars while tracking with multiple tracking zones. When a trackable person is outside of all tracking zones, a snackbar is displayed and provides an option to disable all tracking zones.
  • Resolved the issue with valid licenses displayed as expired licenses
  • Fix for intermittent disconnections between plugin and VisionSuite
  • On/off functionality for Video Auto Switch with Mediacast Router now works as intended. Also, Video Auto Switch now properly waits for camera movement to complete before switching the video feed.
  • Fix for recalling static camera containers with NC-110 cameras
  • Fix static camera control pins for privacy opt-out
  • NC-110 static camera position container does not complete because IsMoving doesn't illuminate during coordinate recalls.
  • Fix for deleted containers showing in the containers drop down