Q-SYS VisionSuite Patch v90.5.0 was released September 29, 2026 with the following updates and resolved issues.

Note: v90.5.0 is only compatible with the VSA-100 in systems running Q-SYS Designer Software (QDS) v10.5.0.

Note: If downgrading a VSA-100 from VS Native 119.1.0 to VS Legacy 90.5.0, please perform a factory reset to start with a fresh database.

Updated Features

SV Suite Updates (VSA-100 only)

• Compatibility with QDS 10.5.0

Resolved Known Issues

• Seervision Plugin: Fixed an issue causing NC-Pro15x to remain in active tracking when stanby is activated.

• Seervision Plugin: Corrected an issue causing NC-Pro15x cameras to have the tilt bottom setting limited to -30° which is not enought for ceiling mounting.

• Seervision Plugin: Corrected an issue that occurs by selecting Invert Pan/Tilt when configuring NC-Pro15x that is ceiling mounted causes error message to display and changing settings is unresponsive.

Hardware Compatibility

• v90.5.0 .squash cannot be used with SVS1-2U and SVS4-2U. Please continue to use 90.0.5 with QDS 10.5.0 with the 90.5.0 plugins for these devices.

• v90.5.0 .squash cannot be used with QDS 10.4.1 and 10.5.1.

• v90.5.0 cannot be used with VisionSuite Designer or VisionSuite Native.

• v90.5.0 (.squash file) supports Q-SYS VisionSuite (ACPR + Seervision) Plugin running on the VSA-100

Q-SYS VisionSuite Patch v90.4.1 was released August 13, 2026 with the following updates and resolved issues.

Note: If downgrading a VSA-100 from VS Native 119.1.0 to VS Legacy 90.4.1, please perform a factory reset to start with a fresh database.

Updated Features

SV Suite Updates (VSA-100 only)

• Compatibility with Q-SYS Designer 10.4.1

• VSA temperature spiking

Seervision Plugin Updates

• Dual support for new Mediacast Router and Camera Router

• Encrypted communication with https and wss for VSA-100s

  • Fully authenticated TLS with certificate on VSA-100 is not supported

  • Peripheral Manager access control on VSA-100 is not supported (no credentials in plugin)

• Core manager logs VSA reboots

Resolved Known Issues

• VisionSuite Plugin: Resolved issue which would cause VisionSuite Plugin controls to revert on a redeploy.

• SV Suite: Fixed issue where occasional reboots corrupted PTU settings with default CALIBRATION values

Hardware Compatibility

• v90.4.1 .squash cannot be used with SVS1-2U and SVS4-2U. Please continue to use 90.0.5 with Q-SYS Designer 10.4.1 with the 90.4.1 plugins for these devices.

• v90.4.1 .squash cannot be used with 10.4.1.

• v90.4.1 cannot be used with VisionSuite Designer or VisionSuite Native.

• v90.4.1 (.squash file) supports Q-SYS VisionSuite (ACPR + Seervision) Plugin running on the VSA-100

Q-SYS VisionSuite Patch v90.3.0 was released July 7, 2026 with the following updates and resolved issues.

Updated Features

ACPR Plugin Updates

• Shure MXA925 support

• Dual support for new Mediacast Router and Camera Router

SV Suite Updates (VSA-100 only)

• Compatibility with Q-SYS Designer 10.3

Resolved Known Issues

• Seervision Plugin: Cameras that are in privacy mode are now properly excluded from recalibration.

• ACPR Plugin: ACPR no longer shows errors before receiving vertical angle from mic.

• ACPR Plugin: Fixed crash when AutoFramingWaitForFraming zone's mic input number exceeds camera count

• ACPR Plugin: Fixed issue with Nureva HDL310 that prevented Nureva internal mixer channel count from being applied correctly

• ACPR Plugin: Expert controls page now shows Outside Zone Home Position Trigger Time slider for MXA925, MXA901, Yamaha RM-CG, and Nureva HDL310/410

• ACPR Plugin: Reinforcement mics no longer use NM-T1-specific channel numbers for zone indexing; all modes now use linear mic numbering so correct zones trigger

Hardware Compatibility

• v90.3.0 .squash cannot be used with SVS1-2U and SVS4-2U. Please continue to use 90.0.5 with Q-SYS Designer 10.3 with the 90.3.0 plugins for these devices.

• v90.3.0 cannot be used with VisionSuite Designer or VisionSuite Native.

• v90.3.0 (.squash file) supports Q-SYS VisionSuite (ACPR + Seervision) Plugin running on the VSA-100

Q-SYS VisionSuite Patch v90.2.0 was released February 26, 2026 with the following updates and resolved issues.

Software Compatibility

v90.2.0 adds support for Q-SYS firmware v10.2.x.

Hardware Compatibility

• v90.2.0 (.patch file) supports Q-SYS VisionSuite (ACPR + Seervision) Plugin running on the VSA-100 on Q-SYS Designer 10.2. v90.2.0 is not compatible with Q-SYS Designer 10.0.x.

• v90.2.0 is not compatible with SVS1/4. Please continue to use 90.0.5 with Q-SYS Designer 10.2 with 90.2.0 plugins for SVS1/4 applications.

Q-SYS VisionSuite Patch v90.1.0 was released February 10, 2026 with the following updates and resolved issues.

Prerequisites

• If your VSA-100 is running v112.0.2, you must downgrade to 90.1.0 for improved stability.

• If your SVS1/4 is running v112.0.2, you must downgrade to 90.0.5 for improved stability. The downgrade process from 112.0.2 to 90.0.5 will result in the user not being able to add zones and position containers will be improperly configured. Please contact QSC support to downgrade SVS1/4 systems.

• v90.1.0 .squash cannot be used with SVS1/4. Please continue to use 90.0.5 with Q-SYS Designer 10.1 with the 90.1.0 plugins for these devices.

• v90.1.0 cannot be used with VisionSuite Designer or VisionSuite Native.

New Features

Seervision Plugin Updates

Improved plugin property and component labeling to more clearly indicate SVS1/4 vs VSA-100 connection modes

SV Suite Updates (VSA-100 Only)

• Compatibility with Q-SYS Designer 10.1.0

• Support for NC-Pro15x, NC-90-G2, and NC-110 PTUs

• Support for presenter tracking using NC-Pro15x with RTSP alongside the camera’s external NDI-HX stream

• Improved detection frame rate on VSA-100 for smoother and more reliable presenter tracking

• Improved RTSP stream decode performance

• Removal of SDI option in SV Suite for VSA-100

Resolved Known Issues

• Video Experience: Resolved issue where NC-Pro15x will randomly move to an unexpected position while tracking.

• Seervision Plugin: Error in Seervision Plugin when static camera has MCR Output set to <None> and system is recalibrated

• Seervision Plugin: "SVS1 / SVS4 Mode" property has been renamed to "VSA model" in SV Plugin.

  Note: Freshly installed plugins will be configured with VSA model = SVS1/4. Any existing Seervision plugins that were configured for VSA-100 with Legacy Property = No, must be manually reconfigured with VSA model = VSA-100. VSA-100 will not connect if VSA model = SVS1/4.

• SV Suite: RTSP stream intermittently drops out under certain stressful network conditions

• SV Suite: RTSP video is extremely delayed after several hours of use, resulting in poor presenter tracking

Software Compatibility

v90.1.0 adds support for Q-SYS firmware v10.1.x.

Hardware Compatibility

• v90.1.0 (.patch file) supports Q-SYS VisionSuite (ACPR + Seervision) Plugin running on the VSA-100 on Q-SYS Designer 10.1. v90.1.0 is not compatible with Q-SYS Designer 10.0.x.
• v90.1.0 is not compatible with SVS1/4. Please continue to use 90.0.5 with Q-SYS Designer 10.1 with 90.1.0 plugins for SVS1/4 applications.

Q-SYS VisionSuite v90.0.6 was released on December 9, 2025 with the following updates and resolved issues.

Prerequisites

• If your VSA-100 is running v112.0.2, you must downgrade to 90.0.6 for improved stability.

• If your SVS1/4 is running v112.0.2, you must downgrade to 90.0.5 for improved stability. The downgrade process from 112.0.2 to 90.0.5 will result in the user not being able to add zones and position containers will be improperly configured. Please contact QSC support to downgrade SVS1/4 systems.

• v90.0.6 cannot be used with VisionSuite Designer or VisionSuite Native.

New Features

Seervision Plugin Updates

• Write Protect improved to function as both a read and write protect.

• New plugin Lock property that protects against plugin configuration corruption and tampering.

Resolved Known Issues

• Seervision Plugin: The issue with zones drifting after placement has been resolved.

• Seervision Plugin: The issue with Is Managed property missing from Seervision plugin has been corrected.

• VisionSuite: "Legacy Connection" property has been renamed to "SVS1 / SVS4 Mode" in SV Plugin.

  Note: Freshly installed plugins will be configured with SVS1/SVS4 Mode = Yes. Any existing Seervision plugins that were configured for VSA-100 with Legacy Property = No, must be manually reconfigured with SVS1/SVS4 Mode = No. VSA-100 will not connect if SVS1/SVS4 Mode = Yes.

• ACPR: The issue causing the graphic layout of ACPR MXA920 rotation in the wrong direction has been resolved.

• ACPR: The issue causing the graphic layout of crossover zones to be incorrect if the mic orientation is rotated has been resolved.

• VisionSuite: VSA-100 is stuck “finishing patching processing” has been resolved.

• VisionSuite: Resolve issue causing slow presenter tracking performance and frequent loss of VIP

• VisionSuite: The issue where tracking exclusion zone sometimes affects tracked subject causing a loss of VIP has been resolved.

Software Compatibility

v90.0.6 requires Q-SYS firmware v10.0.x.

Note: v90.0.6 is not compatible with Q-SYS firmware 10.1.x.

Hardware Compatibility

• v90.0.6 (.squash file) supports Q-SYS VisionSuite (ACPR + Seervision) Plugin running on the VSA-100 only.
• v90.0.6 is not compatible with SVS1/4. Please continue to use 90.0.5 for SVS1/4 applications.