VOIP Out

Input Pins

Input

Audio signal pins are represented by a () circle, and traditional wiring is represented by a thin black line.

By default, the VoIP Out component allows for only one audio input.

Output Pins

This component does not have any output pins.

Name

The Name identifies the Softphone component in Q-SYS Designer.

The name must follow standard naming conventions, restricted to the following:

• ASCII characters a - z, A-Z (case insensitive)
• Digits 0 - 9
• Hyphen (cannot be at the beginning or end of the name)
• Underscore (acceptable with a Q-SYS implementation)
• You cannot use any other characters, symbols, punctuation, or blank spaces.

When you have entered the Name, it displays next to the Softphone icon in the Inventory list, and on the component in the Schematic.

Location

The Location is a means by which you can organize your virtual equipment to correspond to your physical equipment. The Softphone has no physical equipment, so you may want to group this with the Core running the related design. Click in the Location property, the "Default Location" highlights. Type the name of the new location. Once you have entered the new Location name, it is available on the pull-down for the Location property, in addition, the Location lists the Softphone.

Tone Output

When 'Yes' is selected, the Ring, Entry, Exit, and DTMF tones are fed to a separate output channel (Tone Output) on the VOIP In component. These tones can now be routed independent of the voice audio.

Enable Call Sync

When 'Yes' is selected, the Softphone VoIP Out will be enabled for Call Sync. For more information, please visit Call Sync.

Graphic Properties

Label

Use the Label property to change the name of the component in the schematic. The Label property defaults to the component name. To learn more about renaming schematic elements, see Organizing Your Design.

Position

The coordinates reference a specific place in the schematic - for example,"100,100" (horizontal, vertical). 0,0 is the upper left corner of the schematic.

Fill

Sets the fill color of the component in the schematic.

Script Access Properties

Code Name

Displays the currently assign name for control access. You can use the auto-assigned name or customize it. Q-SYS will automatically check all Code Names in the design to ensure name is unique.

Script Access

Defines whether the component will be accessible by script and/or externally, or not at all. Choices include All, External, None (default), and Script.

• None (default) - Not accessible by any script, plugin, or by Q-SYS Remote Control Protocol (QRC).
• Script - Can be accessed by scripts, such as Text Controller, Block Controllers, and plugins only.
• External - Can only be accessed by 3rd party controls systems using component commands from the Q-SYS Remote Control Protocol (QRC).
• All - No restrictions, can be accessed by 3rd party control systems via Q-SYS Remote Control Protocol (QRC), or script objects or plugin objects.

Tip: Use Script Programmer Mode to quickly view the Script Access setting directly on the component in the design schematic without the need to disconnect from the Q-SYS Core processor.

Peak Output Level (dBFS)

Measures the digital output signal level.

Clip

Red LED indicating if the signal is being clipped.

Clip Hold

Holds the clip indication until manually cleared.

Invert

Inverts the audio signal.

Mute

Mutes the digital audio signal.

Gain

Controls the gain of the digital audio signal.

Pin Name	Value	String	Position	Pins Available
Clip (LED)	0 1	false true	0 1	Input / Output
Clip Hold (toggle)	0 1	false true	0 1	Input / Output
Output Gain (level knob)	-100 to 20	-100 dB to 20 dB	0.000 to 1.00	Input / Output
Output Invert (toggle button)	0 1	normal invert	0 1	Input / Output
Output Mute (toggle button)	0 1	unmute mute	0 1	Input / Output
Output Peak Level (level meter)	-100 to 20	-100 dB to 20 dB	0.000 to 1.00	Input / Output