IO Monitor
The IO Monitor allows you to monitor the audio of any supported analog audio input or output or any network RX (Q-LAN, System Link,
- The I/O represented by the component you want to monitor must have a supported I/O type. For example, Flex Input on a Core 8 Flex, a Mic/Line Input on a QIO-ML2x2, or a Q-LAN RX in the Core.
- The component you want to monitor must be in the design. In addition, the output component you want to monitor from must be wired in the design.
Inputs and Outputs
Input Pins
This component does not have any input pins available.
Output Pins
Output
Audio signal pins are represented by a (
) circle, and traditional wiring is represented by a thin black line. You can use Signal Names on audio signal pins.
By default, the IO Monitor component only has one output pin available.
Properties
Tip: For additional properties not listed, refer to the Properties Panel help topic for more information.
Controls
Location
When you add a component to the Inventory, you can leave it in the "Default Location" or create a new location in the Properties of the component.
In the IO Monitor, the Location control is a drop-down list displaying all the Locations created in the design.
Select the Location of the equipment you want to monitor.
Device
After selecting the Location, all of the devices in the selected Location and associated with an output or input are listed in this drop-down list.
Select the device with the audio you want to monitor.
Channel
After selecting the Device, this list narrows the selection to the inputs and outputs available on the selected device. Select the Channel you want to monitor.
Control Pins
|
Pin Name |
Value |
String |
Position |
Pins Available |
|---|---|---|---|---|
|
Channel |
N / A |
Name of the Channel associated with the device |
N / A |
Input / Output |
|
Device |
N / A |
Name of the Device |
N / A |
Input / Output |
|
Location |
N / A |
Location Name |
N / A |
Input / Output |
