Compatibility: by Hardware Revision
This page outlines the minimum versions, both mainline and Long-Term Support (LTS), that are compatible with these hardware product revisions. For an overview of hardware compatibility by Q-SYS Designer Software (QDS) version, see Compatibility: by Software Version.
|
Product |
Description of Change |
First Shipped S/N or Approximate Ship Date |
Minimum Required QDS Mainline Version |
Minimum Required QDS LTS Version1 |
|---|---|---|---|---|
|
Core X50r |
Updated storage drive. Note: Core X50r units with the new SATA SSD cannot be downgraded below v10.5.1. Downgrading to v10.4.1 or v10.5.0 displays an unsupported hardware message. Downgrading to versions earlier than v10.4.1 is also blocked, but displays a generic "406 – Package Validation Failed" error. |
Pending |
v10.5.1 |
Pending |
|
Core 24f |
Updated audio board |
Pending |
v10.4.1 |
Pending |
|
TSC-70-G3 |
Updated LCD display |
Estimated late summer / early fall 2026 |
v10.4.1 |
v9.13.2 |
|
TSC-50-G3 |
Updated LCD display Note: TSC-50-G3 units with the new LCD cannot be downgraded below v10.1. |
Estimated March 2026 |
v10.1.0 |
v9.13.2 |
|
TSC-70-G3 |
Updated NIC hardware sensor |
Estimated late October 2025 |
v10.0.2 |
v9.13.2 |
|
TSC-101-G3 |
Updated NIC hardware sensor |
Estimated late October 2025 |
v10.0.2 |
v9.13.2 |
|
NV-32-H |
DDR4 memory revision Note: NV-32-H units with the DDR4 memory board revision cannot be downgraded below v9.12. |
SN 14TW2506B00001, February 2025 |
v9.12 |
v9.13.1 |
|
NV-21-HU |
i226 LAN controller revision Note: It is not recommended that NV-21-HU units with the i226 LAN controller (July 2024 or later) should be downgraded below v9.10. |
Early July, 2024 |
v9.10 |
v9.13.1 |
|
I/O USB Bridge |
Intel LAN controller replaced due to EOL Note: I/O USB Bridges shipped after July 2025 cannot be downgraded below v10.0. |
S/N: 24TW2530000001 to 24TW2530000010, 24TW2548000001 or higher |
v10.0.0 |
v9.13.1 |
|
Core 110f v2 |
Peripheral mode support |
N/A |
v9.8 |
|
|
Core 110f v2 |
Removal of GPIO from Core 110f due to NXP shortage |
v2 does not have any GPIO inputs |
v9.6 |
v9.4.3 |
|
Core 8 Flex |
Core 8 Flex i226 LAN controller rev support2 |
Shipped after June 2024 S/N: 21TW2419400001 or higher, 21MX2420300117 or higher |
v9.12 |
|
|
Core 8 Flex |
Peripheral mode support |
N/A |
v9.7 |
|
|
Core 8 Flex |
Core 8 Flex change from NXP to Renesas, S049 |
Shipped after March 2023 |
v9.7 |
|
|
Core Nano |
Core Nano i226 LAN controller rev support2 |
Shipped after June 2024 S/N: 21TW2419400001 or higher, 21MX2420300117 or higher |
v9.12 |
|
|
Core Nano |
Peripheral mode support |
N/A |
v9.7 |
|
|
CX-Q (All) |
Support new Ethernet PHY used on Processor board |
S/N: 25CN2342500304 or 21MX2338100099 |
v9.7 |
v9.4.4 |
|
CX-Q 2K4 |
ADC and DAC changes |
S/N: 25CN2321500101 or 21MX2240100025 |
v9.4 |
v9.4.3 |
|
CX-Q 4K4 |
ADC and DAC changes |
S/N: 25CN2316500139 or 21MX2240100010 |
v9.4 |
v9.4.3 |
|
CX-Q 4K8 |
ADC and DAC changes |
S/N: 25CN2323500068 or 21MX2307100129 |
v9.4 |
v9.4.3 |
|
CX-Q 8K4 |
ADC and DAC changes |
S/N: 25CN2323500001 or 21MX2240100023 |
v9.4 |
v9.4.3 |
|
CX-Q 8K8 |
ADC and DAC changes |
S/N: 25CN2316500114 or 21MX2307100214 |
v9.4 |
v9.4.3 |
|
DCIO |
DCIO hardware revision support |
S/N: 12US2402134267 |
v9.10 |
|
|
DCIO-H |
DCIO hardware revision support |
S/N: 12US2350133864 |
v9.10 |
|
|
SPA-Q |
Stand alone mode support |
N/A |
v9.8.1 |
|
|
TSC-101-G3 |
LAN controller change to i210 in May 2023 |
S/N: 14TW2312G00299 |
v9.7 |
v9.4.5 |
|
TSC-50-G3 |
LAN controller change to i210 in May 2023 |
S/N: 14TW2312C00228 |
v9.7 |
v9.4.5 |
|
TSC-70-G3 |
LAN controller change to i210 in May 2023 |
S/N: 14TW2312F00118 |
v9.7 |
v9.4.5 |
|
TSC-G2 |
TSC-G2 models |
Shipped after August 1, 2021 |
v9.1.2 |
v9.4.3 |
|
TSC-G3 |
AV Bridging support |
N/A |
v9.7 |
|
